|
Servo Controlled AC Stabilizer
Stabilizers for balance load and supply systems can be used when variations in input supply voltage (phase to phase or phase to neutral) in all three phase are almost equal. In this Stabilizer a single 3 phase coupled with one drive motor is used for voltage correction. Output of any one phase of the three phase is selected and monitored to actuate the drive motor.
TECHNICAL SPECIFICATION OF SERVO CONTROLLED VOLTAGE STABILIZER
| 01) |
Input Voltage |
Wide variation of input voltage range starting from90V-265V in the lower side & 220V-290V on the higher side for single phase stabilizer & 160V-500V in the lower side and 380V-500V on the higher side for 3Phase variety as per customers specification. |
| 02) |
Output Voltage |
The output Voltage can be set anywhere between 220V-240V in Single Phase and 380V-440V in Three Phase. |
| 03) |
Output Variation |
± 1 % |
| 04) |
System |
Balanced/Unbalanced ( Individual phase correction). |
| 05) |
Control |
Automatic / Manual. |
| 06) |
Instrumentation |
Voltmeter on each phase and Voltmeter and Amp meter to indicate Output Line Voltage and Output Current with the help of selector switch. |
| 07) |
Frequency |
47 Hz to 53Hz ( Sinusoidal ). |
| 08) |
Input Indication |
High and low voltage indicators with Audible alarm. |
| 09) |
Output Wave Form |
The Out put wave form is true replica of the input. |
| 10) |
Correction rate |
25V/sec for each phase. |
| 11) |
Ambient Temperature |
0°c - 45°c. |
| 12) |
Type of Cooling |
Oil Cooled |
| 13) |
Type of Motor |
AC step synchronous Motor |
| 14) |
Protection |
1) A Circuit Breaker is provided at the output for over load /
short Circuit Protection. |
Optional Features
- Spike & surge suppressor is provided at the output.
- Over and under voltage trip facility and single phasing preventor with the help of a contactor system.
- By pass facility from main to stabilizers and stabilizers to main is provided.
|
